Partnership

Calibration Laboratory

Calibration Laboratory was established in 2017; a 3rd Party Laboratory having ISO 17025:2017, ISO 14001:2015 and ISO 45001:2018 accreditation and has recently been duly certified by Qatar Standards (QGOSM). Calibration Laboratory is fully equipped with qualified technical persons, and up to date high precision technology equipment & instruments to cater the demands of our dear clients to provide calibration services on the following sectors:

• Electrical handheld and bench millimeters, current clamp meters, power supplies, thermocouples and RTDs, Watts meters, analog or digital handheld oscilloscopes
• Mechanical hydraulic and pneumatic pressure gauges
• Thermal – thermometers, thermocouples, RTDs, IR thermometers & hygrometers.
• Dimensional & Scale – dial gauges, calipers, micrometers, tape meters and rulers.
• Mass & weight – weighing balances, weights & industrial weight scales.

urther, with our technical capabilities & infrastructure we assure you that we can provide the best qualitative and ontime services with competitive rates

Calibration Laboratory’s target is to provide calibration services to projects administrated by the local ministries, Qatar Petroleum [QP], ASHGHAL [Public Works Authority], Kahramaa.

Calibration Laboratory’s target is to provide calibration services to projects administrated by the local ministries, Qatar Petroleum [QP], ASHGHAL [Public Works Authority], Kahramaa.

TECHNICAL LABORATORIES

TECHNICAL LABORATORIES (Techlab) (est.1996) is an independent Material Testing Laboratory duly certified by Laboratory & Standardization Affairs, Ministry of Environment, State of Qatar, the approval authority and is ISO 17025: 2005 accredited Testing Laboratory. Techlab is also in the list of approved third party laboratories by ASHGHAL (PWA) and is fully equipped with qualified technical persons, equipments & instruments and infrastructure to cater the demands of the clients in the field of:

• Testing – Soil & Aggregate, Concrete, Asphalt, Steel
• Analytical Services – Potable Water, Environmental Testing, Soil & Aggregate
• Geotechnical Engineering Services
• Dewatering Works – Design & Execution
• Ground Water Monitoring System including design & execution, Well Drilling, Well Construction, Pumping Test, Water Quality Analysis, Pump Recommendations & Supply & Installation,
• Contract Drilling, Soak away Borehole Drilling, Earthing Borehole Drilling, Cavity Probe Drilling, Anchor Drilling
• Geophysical Surveying [MASW, ERT, GRP]
• Pressure Grouting
• Slope Stability Analysis & Slope Stability Works
• Concrete Inspection – Concrete Coring, Schmidt Hammer Test, Ultrasonic Pulse Velocity Test, Cover Meter Survey

INSULATION SOLUTIONS CONTRACTING

INSULATION SOLUTIONS CONTRACTING is an ISO 9001:2015 certified company involved in Roofing, and Civil waterproofing using high quality of bituminous felts, liquid applied products, Single Ply products including TPO membrane, and asphalts.

From the smallest interior lobby to the largest Corporate Headquarters, Insulation Solutions offer the same level of commitment and meticulous attention to detail to meet the client's aesthetic, technical and economic expectations in a proactive and reliable manner

To date, INSULATION SOLUTIONS have completed and have ongoing multi-million worth of prestigious projects which includes:

• Waterproofing of Hamad Bin Khalifa Medical City - Oval Car Park (7 Zones)
• Supply & Installation of Waterproofing Systems of Red Line South Metro Underground (32 Km of Tunnels)
• Stirling Lloyd Intergritank Spray Liquid Membrane – Red Line South Metro Underground
• Waterproofing of Ventilation Tunnel (4) Green Line Metro Projec
• Waterproofing of the roof of new Kahramaa Building in Bin Omran
• Grout Injection Works for Tunnel Injection System for P003 Lusail Expressway
• Traffic Signal Gantries Pile Cap – Manateq
• Liquid Applied Waterproofing – Lusail Light Raid Transit

The company is dedicated to training staff to high levels of expertise and awareness of Health and Safety. Qualifications range from competent worker with, NVQ level 2, CSCS cards and various other awards to a Fellow of the Institute of Roofing and where civil works are concerned Member of the Institute of Mastic Asphalt.

GAAR Construction

GAAR Construction was named in 2017 has been an integral part of HAWAR GROUP since its inception in 1982.

From the smallest interior lobby to the largest Corporate Headquarters, Insulation Solutions offer the same level of commitment and meticulous attention to detail to meet the client's aesthetic, technical and economic expectations in a proactive and reliable manner

GAAR’s capabilities stems from HAWAR’s experience through its extended partnerships and companies, Gulf Consolidated Contractors (GCC), Leighton Contracting Qatar (LCQ) and Navayuga Engineering Qatar; GAAR has support from its associates, TechLab, Insulation Solutions, Calibration Lab, Intervention Solutions and GAAR Asphalt; all part of the group managed by HAWAR as a holding.

With over a fleet of 250 construction and heavy equipment and a workforce of skilled and experience personnel, GAAR’s object is the execution of general contracting activities, buildings, drainage, sewerage and pipelines, contracting, roads and bridge construction and generally the execution of all types of civil, electrical and mechanical works and the operation and leasing of heavy machinery.

Häfele Qatar

Häfele Qatar was established in January 2006 involved in the Mechanical and electronic furniture fittings and architectural hardware

As an international partner in the contracts business, we see it as our role to develop the best possible solutions for maximum functionality together with architects, developers, investors, builders and installers. Häfele is prepared and ready to become an essential partner for functionality. The team supplies the complete range of Häfele products to its local market.

The products and services that make up our brand are top class. Häfele brand products are:

• Lift + Turn
• Ixconnect
• Moovit MX
• Dialock
• Officys
• Slido
• Loox
• Engineered Products and Components (EPC)

GAAR Asphalt Factory

The 50,000 sqm of development is located in the light industrial area in Mesaieed for GAAR Asphalt Factory is under rapid development and in its 1 st construction phase.

Our goal by the 3 rd quarter of 2021 is to penetrate the asphalt market and adding an asphalt plant to our contracting business.

We have experienced significant success penetrating the local market by offering superior products and customer services

SURTEQA S.P.C

SURTEQA S.P.C is Registered as a Class A Surveying Consultancy by the Ministry of Municipality and Urban Planning Professional Engineering Committee which provides “Specialized Surveying Solutions” to Clients primarily in the Real Estate, Construction, Oil & Gas and Mining industries; opened early in 2006 Surveying services include:

• Topographic – contour surveys, earthworks volume computation, 3D Digital Terrain Modelling, infrastructure mapping, underground services detection;
• Engineering and Construction – setting out for buildings, infrastructure, roads, railways, process plants, power lines, pipelines, as-built drawings
• Cadastral marking of land parcel boundaries to General Survey Office Specifications and Requirements; pipeline and power line corridors;
• GPS Geodetic Control - Precise control surveys, project datum and reference systems, establishment of GPS Base Stations; transform data from local grid to national or project datum, advice on survey control and mapping requirements for the various stages of project development;
• Audit of Project Survey Systems and Procedures – Check contractors control & setting out, 3rd Party QA/QC;
• Shallow Bathymetric (Hydrographic) seabed, sub-sea pipeline & cable route mapping, marinas, harbor & port development, oil/gas platforms, navigational hazard mapping, jetty / mooring depths
• 3D Laser Scanning (3DLS) – development of accurate 3D Point Clouds & full scale as-built CAD models for offshore platforms, refineries, process plants, heritage buildings, etc.;
• 3D Modelling develop accurate 3D Models from 3D Laser Scan Point Cloud Data
• Underground Utility Survey-provides a comprehensive drawing of the subsurface of an area without the need for digging.
• Dimension Control accurate as-built of complex steel and concrete structures; accurate piping spool and tie-point surveys, eliminate/reduce field welds for faster shutdowns, hook-ups and replacement.

INTERVENTION SOLUTIONS

INTERVENTION SOLUTIONS, a dynamic and fast-growing industrial services company specialized in Fire Stopping, Industrial Coatings, Inspection and Certification Services, Design & Fabrication of structural steel works and specialized lifting devices. INTERVENTION SOLUTIONS

• ire Stopping: : This life safety critical activity is regulated under stringer requirements set out by Qatar Civil Defence Department
• DT and Inspection Weld Inspection using MPI, DP, UT and Eddy Current methods. UV light inspection to detect microscopic cracks in equipment.
• Dimensional Checking: This can be on products ranging from fabricated items to highly specialised machined components for the oil and gas sectors
• Fabrication: We offer a comprehensive fabrication service in mild steel, stainless steel and aluminium. We have a high level of expertise in the design of fabricated steel items, particularly in the lifting equipment sector.
• oatings: Our in house blasting and painting facility can undertake a wide variety of coating applications.
• Project Management: Our project management team look after the industrial services part of the business along with other project-based client requirements
• InTag : Our most recent development uses state of the art handheld digital printing equipment, marking and tagging of items can be done speedily and with much less down time than paint stencilling marks onto equipment.

Leighton Contracting

Leighton Contracting (Qatar) W.L.L. (LCQ) is one of the leading diversified international building and infrastructure contractors established in Qatar, employs more than 7,000 people, making us one of the major construction companies in Qatar. Our strength is our ability to develop innovative, practical solutions for our clients. LCQ is part owned by CIMIC Group, Australia's largest project development and contracting group and a world-leading infrastructure, mining, services and public private partnerships group. The CIMIC Group was established in Victoria, Australia in 1949 and is now headquartered in Sydney. We focus on two core market sectors:

• - Infrastructure
• Building

LCQ has an extensive track record in large-scale building and infrastructure projects in Qatar. For almost 15 years we have built a strong and loyal client base across both the public and private sectors.

Since it’s inception, LCQ has completed projects worth over 20bn QAR including the iconic Al Shaqab Equestrian, New Orbital Highway and Truck Route, New Al Kaaban RPS and Associated Pipelines, New Shahaniya Reservoirs and RPS Upgrades, Al Duhail and Umm Qarn Reservoir and Pumping Stations, Al Mutahidah Towers etc.

INTERVENTION SOLUTIONS

INTERVENTION SOLUTIONS, a dynamic and fast-growing industrial services company specialized in Fire Stopping, Industrial Coatings, Inspection and Certification Services, Design & Fabrication of structural steel works and specialized lifting devices. INTERVENTION SOLUTIONS

• ire Stopping: : This life safety critical activity is regulated under stringer requirements set out by Qatar Civil Defence Department
• DT and Inspection Weld Inspection using MPI, DP, UT and Eddy Current methods. UV light inspection to detect microscopic cracks in equipment.
• Dimensional Checking: This can be on products ranging from fabricated items to highly specialised machined components for the oil and gas sectors
• Fabrication: We offer a comprehensive fabrication service in mild steel, stainless steel and aluminium. We have a high level of expertise in the design of fabricated steel items, particularly in the lifting equipment sector.
• oatings: Our in house blasting and painting facility can undertake a wide variety of coating applications.
• Project Management: Our project management team look after the industrial services part of the business along with other project-based client requirements
• InTag : Our most recent development uses state of the art handheld digital printing equipment, marking and tagging of items can be done speedily and with much less down time than paint stencilling marks onto equipment.

INTERVENTION SOLUTIONS

INTERVENTION SOLUTIONS, a dynamic and fast-growing industrial services company specialized in Fire Stopping, Industrial Coatings, Inspection and Certification Services, Design & Fabrication of structural steel works and specialized lifting devices. INTERVENTION SOLUTIONS

• ire Stopping: : This life safety critical activity is regulated under stringer requirements set out by Qatar Civil Defence Department
• DT and Inspection Weld Inspection using MPI, DP, UT and Eddy Current methods. UV light inspection to detect microscopic cracks in equipment.
• Dimensional Checking: This can be on products ranging from fabricated items to highly specialised machined components for the oil and gas sectors
• Fabrication: We offer a comprehensive fabrication service in mild steel, stainless steel and aluminium. We have a high level of expertise in the design of fabricated steel items, particularly in the lifting equipment sector.
• oatings: Our in house blasting and painting facility can undertake a wide variety of coating applications.
• Project Management: Our project management team look after the industrial services part of the business along with other project-based client requirements
• InTag : Our most recent development uses state of the art handheld digital printing equipment, marking and tagging of items can be done speedily and with much less down time than paint stencilling marks onto equipment.